Caspian Sea operations
Review supported-load guidance, working distance, contact geometry and operator position within the site lift plan.
RiggerSafe® · Caspian
Control the load.
Protect the hand.
RiggerSafe® push pull tools for the Caspian region. Keep hands away from the load contact point during planned guidance, positioning and landing.
PSC Hand Safety India Private Limited · Regional enquiries for Caspian
Configuration, availability and delivery terms confirmed with quotation.
RIGGERSAFE® / NEON GREENHands off. Safety on.
Hands offGuidance without direct hand contact
9 lengthsAcross the commercial range
3 coloursGreen · yellow · blue
PDF resourcesSelection · operation · test report
The company behind the tool
A safer distance.
A better method.
The load is almost landed. The gap is almost closed. A hand reaches in for one last adjustment. RiggerSafe gives the lifting team a dedicated control point for that moment.
Use a dedicated guidance tool to move the contact point away from the hand. Choose the tool and working distance through task assessment, with the load supported by the approved lifting system.
Read the RiggerSafe engineering guidebook ↗01
Purpose-built load guidance
A wide contact head, fibreglass shaft, hand guard and D-handle bring controlled engagement into daily rigging work.
02
The complete assembly matters
The entire assembly is proof-load tested to 300 kg push and 150 kg pull. These are proof-test values, not a Safe Working Load (SWL). View the test certificate ↗.
03
Control without direct hand contact
Guide and position the load while keeping hands away from the immediate contact point. Used within the lift plan and site risk assessment.
A guidance tool, not a lifting device. The crane and rigging carry the load. Proof-test values are not a lifting capacity or permission to apply excessive manual force.
Configure your RiggerSafe
One standard of guidance.
A range built for your site.
Three high-visibility colours. Nine distinct lengths across the range. Select an available colour and length, then choose the contact insert for your application.
Your configuration
Enquire about this configuration ↗21″24″36″42″48″50″60″72″96″
Yellow & neon green: 21, 42, 50, 72 and 96 inches.
Blue: 24, 36, 48, 60, 72 and 96 inches in the range. Confirm special combinations and current quantities when ordering.
Range photographs show representative configurations. Confirm the exact size, insert, jacket and model reference with your quotation.
Choose the contact. Keep the control.
Three inserts.
Different working surfaces.
01 / RUBBER
Everyday grip.
The standard contact option for routine industrial guidance, with grip and surface protection at the load interface.
02 / TEFLON
Smoother contact.
A low-friction option for applications where sliding contact and a non-marring interface are priorities. Confirm suitability for the load surface.
03 / ALUMINIUM
Abrasive surfaces.
An alternative where abrasive loads accelerate rubber wear. The polymer head remains a consideration when assessing temperature suitability.
Shaft configuration / confirm with quotation
Plastic-jacketed fibreglass.
Bright fluorescent neon-green.
Specify the plastic-jacketed fibreglass configuration required for your application. A distinctive fluorescent finish for teams that want a consistent, highly visible RiggerSafe standard.
Ask for the jacketed neon-green version ↗Where the work demands distance
From offshore decks
to industrial yards.
01 / OIL & GAS
Offshore & drilling
Load guidance during deck lifts, equipment positioning and supply operations, within approved lifting procedures.
02 / MARINE & LOGISTICS
Shipyards & ports
Help teams guide suspended components and align cargo while maintaining separation from moving loads.
03 / HEAVY INDUSTRY
Steel, mining & EPC
Controlled contact during plant maintenance, fabrication and equipment installation across demanding industrial sites.
RiggerSafe / Caspian
Local industries.
Purpose-built guidance.
Regional information for Caspian region. Start with the hand’s function, then assess the contact point, working distance and operating method. Regional references are enquiry guides and do not indicate local offices, stock or approvals.
Energy supply bases
Review supported-load guidance, working distance, contact geometry and operator position within the site lift plan.
Industrial ports
Review supported-load guidance, working distance, contact geometry and operator position within the site lift plan.
Fabrication & maintenance
Review supported-load guidance, working distance, contact geometry and operator position within the site lift plan.
Find The Hand™ by PSC Hand Safety
Find the hand.
Find the function.
Engineer the Hand Out
of the Hazard™.
Observe the point where a worker guides, holds, aligns or corrects a load near a closing gap. Consider elimination, isolation and the lifting method first. Then assess whether a suitable interface can reduce direct hand contact.
Offshore & supply bases
Review deck cargo, equipment landing and supported pipe guidance.
Shipbuilding & fabrication
Assess the contact geometry, available working space and release during positioning.
Steel & maintenance
Separate load guidance from manual carrying, lifting and striking-tool holding.
The Last 300 mm Rule™ is an HSF observation concept, not a universal safe distance or regulatory standard. The site assessment determines the required separation.
Explore Find The Hand™ and the wider PSC range ↗Practical selection notes
Specify the job.
Then specify the tool.
RIGGERSAFE / FIELD GUIDE
Choosing working length ↗
Reach, access and operator position belong in the same decision.
RIGGERSAFE / FIELD GUIDEPlanning a site trial ↗
A short, documented evaluation before a larger site rollout.
RIGGERSAFE / FIELD GUIDEInspection and care ↗
Check the complete tool before it reaches the workface.
For lifting teams & procurement
Make an informed specification.
Download the assembly proof-load test certificate — 300 kg push / 150 kg pull ↗
Practical answers
Before you specify.
Can you supply RiggerSafe tools to Caspian?
Contact PSC Hand Safety Caspian with your selected configurations, quantity and delivery destination. The team will confirm available stock, lead time, domestic freight, duties, taxes and commercial terms for your order.
Which length should our team choose?
Choose the shortest tool that provides the required separation while preserving effective guidance. Consider the load, contact point, working space and lifting plan. The range spans nine lengths from 21 to 96 inches, with colour-specific availability.
Is the proof-test value a lifting capacity?
No. The entire assembly is proof-load tested to 300 kg push and 150 kg pull. These are proof-test loads, not an SWL or lifting capacity. RiggerSafe guides the load; the crane and rigging support it. Follow site procedures.
Can we standardise tools across several sites?
Yes. Share the tasks and site requirements so PSC can recommend a colour, length and insert mix for a pilot, then support a broader procurement specification.
Where can we see PSC’s complete hand safety range?
Visit www.pschandsafety.com and www.handsafetyfirsttools.com for the wider range of hand exposure control tools.
Specify a better working distance
Put RiggerSafe
on your next lift.
Tell us your application, delivery country / city and required quantities. PSC Hand Safety Caspian will help confirm tool selection, availability and regional supply terms.
Availability, dispatch timing and delivery terms confirmed with your quotation.